2
3
Gas Installation Codes
• Barbecues must be used in accordance with
the installation requirements of your gas supply
authority, or the Australian Standard AS 5601.
• Barbecues for use with bottled gas are labelled
‘propane gas’ or ‘Universal L.P.G’.
• Barbecues for use with natural gas are labelled
‘natural gas’ and must be installed by an
authorised person. Check the gas type sticker
attached to the barbecue.
Clearances
Minimum Clearances from
combustible materials must be:
Rear 300mm
Sides 300mm
Above 1000mm
Specifications
Barbecue specifications can be found
on the data label attached to the barbecue body.
Hose connection thread is 5/8”-18 UNF.
IMPORTANT
Read these instructions carefully prior to use.
Familiarise yourself with the appliance before
connecting it to it’s gas container. Keep these
instructions for future reference.
IF YOU SMELL GAS
1. Shut off gas to the barbecue at its source,
if possible.
2. Extinguish any open flame.
3. Open hood.
4. If odour continues immediately call
your gas supplier or fire department.
Hose & Regulator Safety
The regulator and hose assembly supplied
with the barbecue are suitable for Propane Gas
or Universal L.P.G. only.
A gas regulator adjusted to have an outlet
pressure of 2.75kPa is supplied for connection
to the propane gas cylinder. The pressure
regulator and hose assembly supplied with the
barbecue must be used. Replacement pressure
regulators and hose assemblies must be those
specified by the barbecue manufacturer.
When connecting the hose and regulator
assembly to the gas cylinder, take care to avoid
unnecessary twisting of the flexible hose.
After the assembly has been secured, turn on
the gas and check for leaks by brushing a soap
and water solution over all connections.
If you are unable to correct the leak by tightening
the connections, turn off the gas and contact
the supplier immediately.
Always ensure the barbecue is kept away from
flammable materials and the gas cylinder clear
of any heat source.
When changing over from an empty gas cylinder
to a full one make sure this procedure is carried
out in a well ventilated location, preferably
outside, away from people and away from any
sources of ignition; such as naked flames, pilot
flames, electric heaters/equipment.
Gas Cylinder Use & Safety
This is a low pressure barbecue and must only
be used with the regulator supplied. Your
barbecue is designed for use with 4.5Kg or 9Kg
propane gas cylinders certified to AS 2469.
The gas cylinder should be filled by
a reputable gas supplier and visually inspected
and re-qualified at each filling.
Always keep cylinder in an upright position.
Always close the cylinder valve when the
barbecue is not in use.
Do not subject gas cylinder to excessive heat.
Never Store your Gas Cylinder Indoors.
If you store your barbecue indoors, ALWAYS
disconnect the gas cylinder first and store
the cylinder safely outside.
Cylinders must be stored outdoors in a well
ventilated area out of reach of children, and must
not be stored in a building, garage or any other
enclosed area.
GENERAL INFORMATION
NEW LCC27 GAS CYLINDER AND
APPLIANCE CONNECTION
This appliance has been supplied with the new
safer gas cylinder connection SafeLok LCC27
Type 27 regulator and hose connection.
This connection will only connect to a 4kg or
9kg gas cylinder with an LCC27 Type 27 cylinder
valve. This connection will NOT connect (screw)
to the old type 21 POL gas cylinder valve.