Gasmate ORBITOR BQ1079, Manual, Page: 14 / 16

14 15
OPERATION
BURNER OPERATION & IGNITION SYSTEM CHECK
Problem Possible Reason Solution
Burner will not ignite
Control knob is closed Turn knob to high when lighting
Piezo igniter is faulty Use a long barbecue match
inserted through the hole on under side
of barbecue
Food is not cooking
or is taking too long
Burner has gone out Check that the gas bottle is not
empty and re-ignite the burner
Cooking surface was not given
enough time to warm up before
the food was applied Remove the food and give the burner time
to warm the cooking surface (5-10 mins)
There is too much food on
the cooking surface Cook smaller portions
OPERATING PROCEDURE
Cooking
The control knob can be turned from ‘HIGH’ to
‘MED’ or ‘LOW’ depending on the heat required.
With the hood down the burner must only be used
on ‘LOW’.
Servicing
Servicing should be conducted every year
or sooner if required.
The appliance must only be serviced by an
authorised person.
IMPORTANT
The hood must be in the open position
for lighting.
Do not smoke at any time when attempting
to ignite the barbecue burners.
Do not leave the barbecue unattended
when alight.