7
Separation
Panel
M5x12
2 PC
5
6
STEP 5
Locate automatic igniter under control panel.
Unscrew igniter cap and insert a 1.5V AA battery
(not included).
STEP 6
Installing the Separation Panel
a. Holding the panel on both sides with the
bent tabs facing downwards, flex the panel
sides upwards forming the panel into a
concave curve.
b. Align the panel central rear slot with the
vertical upright beam in the cylinder
compartment just above the upper most rows
of ventilation holes and manoeuvre it into
position ensuring that all of the panel cut outs
align with the corresponding beams.
c. Attach the panel to the side beams using two
wing screws through the bent tabs.
d. Ensure the hose is located into the split rubber
grommet.
DO NOT USE HEATER UNTIL PANEL IS
INSTALLED.
Connect the regulator to the gas cylinder then
turn gas on and check for leaks using a soapy
water solution.
AA 1.5V Battery
(not included)
