Gasmac GARAGEMAC GM-40S, Installation & Operating Instructions Manual

Page: 2 / 44

2
APPLIANCE OVERVIEW
The Garagemac Shop/Garage heater is supplied with a region specific ½” flexible gas
connector, a 24V thermostat, and a 4” OD side wall exhaust termination cap.
GM-40S GM-40U
OVERALL LENGTH: 22’ / 670 cm OVERALL LENGTH: 12’ / 366 cm
OVERALL WIDTH: 13” / 33 cm OVERALL WIDTH: 22” / 66 cm
OVERALL DEPTH: 10” / 25 cm OVERALL DEPTH: 10” / 25 cm
WEIGHT: 90 lbs. / 41 kg. WEIGHT: 90 lbs. / 41 kg.
BUILDING SPAN REQ: 25’ / 762 cm BUILDING SPAN REQ: 15’ / 457 cm
CEILING HEIGHT REQ: 8’ / 244 cm CEILING HEIGHT REQ: 8’ / 244 cm
NOTE : Above appliance dimensions represent the maximum at any
point in the appliance. Dimensions at certain points of the
appliance may be less.
WARNING
THIS AND EVERY GAS FIRED PRODUCT MUST ONLY BE INSTALLED OR
SERVICED BY A PROFESSIONALLY LICENSED AND QUALIFIED GAS
TECHNICIAN. INSTALLING GAS FIRED APPLIANCES WITHOUT THE REQUISITE
LISCENCE, KNOWLEDGE AND/OR UNDERSTANDING OF ALL RELEVELANT
CODES AND REQUIREMENTS CAN RESULT IN FIRE, EXPLOSION, PROPERTY
DAMAGE, INJURY, DEATH, BE CONSTRUED AS NEGLIGENCE, AND/OR CAUSE
THE CANCELLATION OF IN FORCE LOSS/LIABILITY INSURANCE COVERAGE.
ENSURE THAT ALL WARNINGS, NOTICES, AND INSTRUCTIONS IN THIS
MANUAL ARE FULLY READ AND UNDERSTOOD BEFORE INSTALLING THIS
APPLIANCE. IF UNCLEAR ON ANY PORTION OF THIS MANUAL, PLEASE
CONTACT THE MANUFACTURER FOR CLARIFICATION PRIOR TO
INSTALLATION.