Installation Manual, Maintenance and Operation
Pressure Regulating Valve – Model Horus
MI-18
Elaborate
Verified / Approved
CSQ
Date
Review
Page
J.Junior
Celso Nieto
JM
25/11/16 04
13 de 32
4.5 SCHEME RECOMMENDED INSTALLATION
4.5.1 SINGLE REGULATOR
1 – Inlet shut-off valve
6 – Partial relief valve
2 – Filter cartridge type degree of filtration 5 micra
7 – Output pressure gauge + manifold 2 way
3 – Entry gauge + manifold 2 way
8 – Valve vent
4 – Automatic shut-off valve for over pressure (SSV)
9- Output block valve
5 – Pressure regulator valve model URANO GASCAT
Note: The position indicated for the sensor outlet may be less than 5D from the installation project to be reviewed and
approved by engineering GASCAT.
Another recommended installation option is the use of a lung to connect the sensor taken near the equipment, among
the advantages of adopting this configuration include:
1) Greater convenience during maintenance.
2) Pneumatic signal of better quality (stable).
3) Reduction of damage to tubbings during maintenance and transport.
Note: The position indicated for lung outlet may be less than 5D from the installation project to be reviewed and
approved by engineering GASCAT.
