Gasboy Islander PLUS, Installation Manual

Page: 63 / 146

3-4. MAPPING THE SITE– EXAMPLE
3-4.1. General
This paragraph shows an example of the mapping of a site. This procedure consists of the
following steps:
•
Locating and mapping all objects of the site
•
Assigning logical identifications (Id.) to the devices
•
Assigning the Ethernet and Serial addresses of devices linked to the network
•
Obtaining a functional and physical map of the devices in the site.
3-4.2. Locating all objects of the site
•
Locate the roads around the site
•
Locate the islands and their dispensers
•
Locate the fuel tanks
•
Locate the intended position of the Islander PLUS pole
•
Locate the intended position of each ICR PLUS
•
Draw a basic map of the site with all the objects
3-4.3. Assigning Logical IDs
3-4.3.1. To each fuel tank
•
Assign the tank sequential number (coordinated with the station manager)
•
Assign its fuel code and name
•
Assign its TLG Probe (AP) Id.
3-4.3.2. To each Dispenser Unit
•
Assign an id. to every dispenser name and Pump Server
•
Assign an id. to every dispenser pump (P)
•
Assign an id. to every pump CPU addresses if any
•
Assign an id. to its nozzles (N)
•
Assign to each nozzle the tank (T) Id. to whom it is linked.
3-4.3.3. In the Islander PLUS pole
•
Assign the Islander PLUS its id.
•
Assign the panel printer (PP) its Id.
•
Assign their ids in an ascending order with the dispenser unit ids
3-4.4. Mapping
•
Draw a map of the site.
•
Use the map methodology and Ids. for later setup configuration.
Islander PLUS Manual
49