8
Basic Operation
1. Turning the unit On / Off
Press the Power Button to turn the unit on. When the unit is on, press the Power Button once to turn the TFT off. During TFT off, the video out signal will be
available so that the connected monitor will show the screen of the unit. Press the Power Button again to turn the TFT back on. Press and hold the POW
button again to turn the unit off.
2. Mode Selection
Press the MODE Button to cycle the Play Mode between RADIO, USB, SD and AUX in.
3. Sound Control
A. Volume
Use the VOL +/- Button to adjust the volume level. Turn the button clockwise to increase the volume, and vice versa. The larger the number of volume, the
higher the volume level.
B. Bass
Press the SEL Button until the display shows “BAS”. Use the VOL +/- Button to adjust. When EQ is ON, bass control is not available.
C. Treble
Press SEL Button until the display shows “TRE”. Use the VOL +/- Button to adjust. When EQ is ON, treble control is not available.
D. Balance
Press SEL Button until the display shows “BAL”, then use the VOL +/- Button to adjust the balance between the left & right speakers.
E. Fader
Press SEL Button until the display shows “FAD”, then use the VOL +/- Button to adjust the balance between the front & rear speakers.
F. Preset Equalizer Function
Press the SEL Button until the display shows “EQ OFF”, then use the VOL +/- Button to choose the equaliser sound effects. The Sequence of equalizer
setting will be EQ OFF-POP-ROCK-CLASSIC.
G. Beep On/off
Press the SEL Button until the display shows “BEEP ON”, then use the VOL +/- Button to turn the beep sound off. The word “BEEP OFF” will be shown on
the display.
H. Loudness
Press SEL Button until the display shows “LOUD OFF”, then use the VOL +/- Button to turn loudness on. The word “LOUD ON” will be shown on the dis-
play.
4. Mute Control
Press the MUT Button to activate the Mute function. Press MUT Button again or use the VOL +/ - Button to cancel.
5. HOME Button
In Radio and Aux modes, press the HOME button to go back to the home screen. You can select different play modes by turning and pressing the volume
knob. Also you can enter the setup menu in the home screen.
In USB and SD modes, during music or video playback, press the HOME button once to go back to the directory page, in which you can choose the desired
file by pressing and turning the volume knob. Press again the HOME button to go back to the home screen.
