THANK YOU FOR PURCHASING THIS GAS DAY & NIGHT
DEHUMIDIFIER CONTROLLER.
By plugging a dehumidifier into the controller it will automatically regulate the humidity by
switching the dehumidifier on and off.
FITTING INSTRUCTIONS
Find a suitable position for your controller. This should be indoors and away from water
and liquids.
The best position for the sensor is the middle of the room.
PLEASE NOTE:
We advise that you have good air circulation in your room, this will
prevent hot spots or high humidity zones. The sensor will be more accurate if the air is
moving, therefore making the controller more accurate.
The sensor is a sensitive device. It is sensitive to moisture, do not put the sensor directly
above a humidifier. Do not drop or hit the sensor. Damage to the sensor may not be
covered by the product warranty. KEEP AWAY from water and aerosols.
All electrical connections should be protected from liquids and high moisture. Therefore
ideally only the sensor should be in the area with high humidity.
1. Connect your dehumidifier plug to the controller socket.
2. Ensure the mains socket is switched off.
3. Plug the controller into the mains socket.
4. Place the sensor into the environment to be controlled, following the guidelines
above.
5. Switch the mains socket on.
DEHUMIDIFY
ON
20%
90%
80
30
40
50
70
60
20%
90%
80
30
40
50
70
60
Day humidity setting
Night humidity setting
Humidity / light probe
Power LED
