SETTING THE CONTROLLER
1. Use the left hand dial to set your desired daytime humidity.
2. Use the right hand dial to set your desired night time humidity.
3. The controller will now control the humidity by switching the dehumidifier on and off
based on the desired humidity for day or night. The green LED will light when the
dehumidifier is switched on.
4. Remember that the controller can only remove humidity, this controller cannot add
humidity but there is a humidify version available.
5. A rapid flashing of the green LED indicates a problem with the sensor. Replacement
sensors are available.
For electrical products sold within the UK and the European Union this symbol means
that this product must not be placed into general waste as the end of the product’s useful
life. It should be sent to a separate recycling facility. Check with your local authority for
recycling advice.
By recycling responsibly, it will protect the environment and human health.
Assembled by Global Air Supplies
Unit 36 Meadows Road, Wath upon Dearne, Rotherham S63 5DJ
