3. Remove the tank rubber.
4. Unscrew screw of fuel tank.
5. Extract the fuel tank.
6. Extract the protector cap.
Spark Plug maintenance
CAUTION
Incorrect installation of the plug or an incorrect heat range choice
may cause extensive engine damage, and such damage would not
be covered by the warranty.
Use always manufacturer-recommended spark plugs. Consult your
dealer or a qualified mechanic in order to know which is the best
plug for your motorcycle.
Extract the spark plug
To remove the spark plug, follow the following steps:
1. Remove the seat..
2. Disconnect the pump cables
(caution: the tubes contain gasoline).
WILD HP -
109
-
NOTE
for the correct use of the plug, it is protected by a cap.
Keep the cap clean and dry.
7. Extract de plug and
r e m o v e t h e c a r b o n
deposits from the spark plug
with a small tip or a metallic
brush. Readjust the gap in
the plug between 0.7 and
0.8 mm (0.028 - 0.031 in.).
Before removing the carbon
deposits, check its color; this
color tells us whether the
standard plug is the best for
our use.
NGK
CR7E
CR8E
CR9E
DENSO
U22ESR-N
U24ESR-N
U27ESR-N
COMMENTS
If the standard plug looks
wet or has a dark color,
replace.
Standar
If the standard plug looks
glassy or has a white color,
replace the plug.
WARNING
When the injection pump pipes are removed, gasoline may be spilled
and cause a fire.
Stop the engine before removing the tank. Keep flames and sparks
away from the gas cap. Do not smoke.
Summary of Contents for WILD HP 450
Page 1: ...TENZIONE TENZIONE ...
Page 2: ......
