GAS GAS WILD HP 450, Service Manual

Page: 14 / 63

LIGHTS
NOTE
The headlight and the rear light can only be switched on when
the engine is on.
Press the red button (B) , located to the right of the switch above, to
switch to high beam (Position: ). The high beam can only be
turned on when the short beam is on.
Slide switch (A) down to the OFF position to turn off the headlight
and the rear light.
MAIN PARTS OF THE QUAD
CONTACT KEY
The key (A) is located on the front part of the handlebars. To turn
the contact on, turn the key clockwise to the "ON" position.
To turn contact off, turn the key anti-clockwise to the "OFF" position.
START THE ENGINE
This quadricyle has been fitted with an electric starting mechanism
and a pedal-operated one.
Control
(B) is on the right-hand side of the handlebars.
Pedal (C) is located on the right-hand side of the quadricycle. You
will find it in the rest position. Pull this control until it reaches its work
position.
WILD HP -
79
-
Switch (A) slides into three
positions, we will find it in
the "OFF" position.
(A)
(C)
(B)
Short beam
Low beam
Whithout lights
(A) (B)
(D)
(C)
(E)
(A). Light indicator.
(B). High beam.
(C). Blow of high beam.
(D). Indicators.
(E). Horn button.