background image

Important notice

Read this Manual carefully. You will find it contains all the necessary information for your safety, and

that of third persons, as well as guaranteeing the correct conservation and maintenance of the GAS

GAS motorbike you have just bought.

You will find all the necessary instructions for the correct riding and control of this vehicle are set out

below. Each message is proceeded by a sign whose meaning is the following:

Be careful! This sign introduces all those rules and precautionary measures necessary to

avoid slight or severe injuries, or even the death of the user should these instructions not be

correctly followed.

Look out! This sign introduces special warnings to avoid damaging your motorbike. Should

these warnings not be heeded, the guarantee may be automatically invalidated.

Various notes. These are the indications necessary for the optimal control and adjustment

operations, together with those tasks of conservation and maintenance of the motorbike in

order that you may  obtain the greatest possible satisfaction from your vehicle.

The aim of this Manual is to help the user to minimise or avoid possible damage to people, property,

the environment, and naturally to his/her new motorbike. For this reason, all the information presented

here is based on data obtained from the latest models put on the market just before the publication

of this Manual. However, GAS GAS Motos, S.A. reserves the right to make modifications without any

prior warning being given to consumers and without incurring any additional obligations in so doing.

Your local dealer will also provide you with any information as might be deemed necessary.

-4-

Summary of Contents for TXTPRO - 2009


























































Reviews: