A
32
31
7
C
7
7
B
C
After any operation
involving the dismantling
or putting back together
of the clutch operating
circuit, any remaining air can be
eliminated using the air bleed
(A)
.
C
To check the oil level,
first make sure the
motorbike is in a stable
position on a horizontal
surface. If the bike has been in
use, wait a few minutes. To check
the oil level, unscrew the cap
(C)
and examine the level of oil using
the dip-stick. The level should be
between the marked maximum and
minimum levels. If it is too high,
drain the excess. If it is too low, add
the necessary quantity by opening
the oil cap. Use the same type and
make of lubricant as that which is
already in the engine.
C
The circle indicates
where the radiator
should be drained
(B)
.
-
18
-
