Owner's Manual
-22-
To iniciate the stopping of the bike follow the below steps: respect the
order of the steps
:
The first step will be to actuate on the switch located on the rigth side
of the handlebar, select switch on lower position (1), this will stop the
elctric motor of the bike (btu still the general power is on).
Next step will be to actuate on the general switch located on the
upper part of the ritgh side of the bike (2).
Select the option OFF (3) on this switch. This option will disconect the
general power of the bike.
On the left side of the handlebar is located the switch (4), this is the
switch for emergency stop (rider safety device). This device allow to stop
the bike in a risky situation. Anyway, after stopping the bike by this device
you will have to select the option OFF (3) at the general power switch, to
proceed with the general disconection of power of the bike.
DON’T FORGET TO COMPLETE THE LAST OPERATION.
OTHERWISE, IF YOU DON’T SELECT OPTION OFF, THE BIKE WILL
CONTINUE CONSUMING POWER FROM THE BATTERY AND THIS
COULD CAUSE THE DEEP DISCHARGE OF IT.
Stopping vehicle protocol
4
1
3
A
2