Owner's Manual
-27-
REAR SHOCK ABSORVER
REIGER
Rider weigth
without
equipement (Kg)
K (N/mm) spring
Spring preload
(mm)
Up to 70
67,5
De 6,5 a 7,5
From 70 to 80
70
7
Series
From 80 to 85
72,5
De 7 a 7,5
Over 85
75
De 7 a 7,5
The rebound or extension is adjusted with by the screw. The standard
position is 28 clicks from closed. From this starting position, open clicks
if faster extension or rebound is desired and close clicks if slower
extension or rebound is desired. It's advisable to work out 10 clicks
opening or closing from standar position but not more.
Rear shock absorver
C
The preload of the shock absorber is adjusted by rotating the toothed
rings (C) with two special spanners. Starting from the standard preload of
7 mm , tighten or loosen, depending on the weight of the rider, reaching
as a maximum 9 mm of preload (see spring and preload table).
Preload is the difference in length (mm) between the free spring and after
applying the preload
.
