GAS GAS MC 450F 2022, Owner'S Manual

Page: 86 / 157

11 SERVICE WORK ON THE CHASSIS
84
A00825-10
–
Move the hydraulic clutch fluid reservoir mounted on the handlebar
into a horizontal position.
–
Remove screws
1
.
–
Take off cover
2
with membrane
3
.
A00893-10
–
Fill bleeding syringe
4
with the appropriate hydraulic fluid.
Syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
p. 144)
–
On the clutch slave cylinder, remove the protection cap and mount
bleeding syringe
4
with an appropriate hose piece on bleeder
screw
5
.
–
Only loosen bleeder screw
5
on the clutch slave cylinder until fill-
ing is possible.
Info
Use water to immediately clean up any brake fluid that has
overflowed or spilled.
Avoid contact between brake fluid and painted parts. Brake
fluid corrodes paint.
Only use clean brake fluid from a sealed container.
A00826-10
–
Now press the fluid into the system until it emerges from hole
6
of the master cylinder without bubbles.
–
Occasionally extract the fluid from the master cylinder reservoir to
prevent overflowing.
–
Tighten the bleeder screw and remove the bleeding syringe with the
hose. Mount the protection cap.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim 4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the
screws.