GAS GAS MC 450F 2022, Owner'S Manual

Page: 126 / 157

17 SERVICE WORK ON THE ENGINE
124
G05123-10
–
Remove screws
5
. Remove the oil filter cover with the O-ring.
S02294-10
–
Pull oil filter
6
out of the oil filter housing.
Lock ring plier (51012011000)
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surfaces.
S02295-10
–
Lay the motorcycle on its side and fill the oil filter housing to about
⅓
full with engine oil.
–
Place the oil filter into the oil filter housing.
–
Lubricate the O-ring of the oil filter cover and mount it with oil filter
cover
7
.
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover M6 10 Nm (7.4 lbf ft)
–
Stand the motorcycle upright.
401955-12
–
Remove filler plug
8
with the O-ring, and fill up with engine oil.
Engine oil 1.2 l (1.3 qt.) Engine oil (SAE
10W/50) (
p. 144)
Info
Too little engine oil or poor-quality engine oil will result in
premature wear of the engine.
–
Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling
them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when
running the engine.
–
Use effective exhaust extraction when starting or run-
ning the engine in an enclosed space.
–
Start the engine and check it for leaks.
Finishing work
(MC 450F TROY LEE DESIGNS)
–
Install the motor guard. ( p. 52)
–
Check the engine oil level. ( p. 121)