GAS GAS MC 250F FACTORY EDITION 2023, Owner'S Manual

Page: 70 / 148

11 SERVICE WORK ON THE CHASSIS
68
F02581-10
Main work
–
Drill out all rivets on the main silencer and remove silencer cap
1
with O-ring
2
.
–
Remove glass fiber yarn
3
from the silencer cap.
–
Pull glass fiber yarn filling
4
out of outer tube
5
.
–
Clean the parts that need to be reinstalled and check for damage.
–
Mount new glass fiber yarn filling
4
on the inner tube.
–
Position new glass fiber yarn filling
3
in silencer cap
1
.
–
Insert silencer cap with O-ring
2
into the outer tube.
–
Rivet according to manufacturer specifications.
Finishing work
–
Install the main silencer. ( p. 67)
–
Install the right side panel. ( p. 62)
–
Install the frame protector. ( p. 50)
11.37 Removing the fuel tank
Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
Warning
Danger of poisoning Fuel is harmful to health.
–
Avoid skin, eye and clothing contact with fuel.
–
Immediately consult a doctor if you swallow fuel.
–
Do not inhale fuel vapors.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
–
Change your clothing if fuel spills on them.
–
Keep fuels correctly in a suitable canister, and out of the reach of children.
Preparatory work
–
Remove the air filter box cover. ( p. 62)
–
Remove the seat. ( p. 60)
–
Remove the frame protector. ( p. 50)
–
Remove the right side panel. ( p. 62)