GAS GAS MC 250F FACTORY EDITION 2023, Owner'S Manual

Page: 58 / 148

11 SERVICE WORK ON THE CHASSIS
56
Guideline
Screw, top triple clamp M8 17 Nm (12.5 lbf ft)
–
Check the steering head bearing play. ( p. 55)
Finishing work
–
Mount the handlebar cushion.
–
Remove the motorcycle from the lift stand. ( p. 47)
11.17 Lubricating the steering head bearing
H02387-01
–
Remove the lower triple clamp. ( p. 52)
–
Install the lower triple clamp. ( p. 53)
Info
The steering head bearing is cleaned and lubricated in the
course of removal and installation of the lower triple clamp.
11.18 Removing the start number plate
W00195-10
–
Remove screw
1
.
–
Unhook the start number plate from the brake line and remove it.
11.19 Installing the start number plate
W00196-10
–
Position the brake line in holders
A
on the start number plate.
–
Position the start number plate. Mount and tighten screw
1
.
The holding lugs engage in the fender.