GAS GAS MC 250F FACTORY EDITION 2023, Owner'S Manual

Page: 62 / 148

11 SERVICE WORK ON THE CHASSIS
60
F03704-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
6
.
Guideline
Nut, linkage lever on
angle lever
M16x1.5 60 Nm (44.3 lbf ft)
Info
Pay attention to flat area
B
.
–
Mount and tighten screw
7
.
Guideline
Screw, bottom
shock absorber
M10 60 Nm (44.3 lbf ft)
Loctite ® 2701™
Info
Raise the link fork slightly to be able to mount the screw
more easily.
Finishing work
–
Check the free travel of the foot brake lever. ( p. 86)
–
Install the main silencer. ( p. 67)
–
Install the right side panel. ( p. 62)
–
Install the frame protector. ( p. 50)
–
Remove the motorcycle from the lift stand. ( p. 47)
11.24 Removing the seat
Caution
Danger of burns The voltage regulator gets very hot when the vehicle is driven.
–
Allow the voltage regulator to cool down before performing any work.
Preparatory work
–
Remove the air filter box cover. ( p. 62)
W00197-10
Main work
–
Remove screw
1
.