Multi Gas Clip User’s Manual
UM MGC V2.0
8
17 of 21
ACCESSORIES AND REPLACEMENT PARTS
•
MGC Dock
(P/N: MGC-DOCK) - Portable docking station in durable Pelican case for automated 4-detector
simultaneous bump testing, calibration, record keeping and programming
•
MGC Wall Mount Dock
(P/N: MGC-WMDOCK) - Docking station for automated 4-detector simultaneous bump
testing, calibration, record keeping and programming
•
GCT IR Link
(P/N: GCT-IR-LINK) – Infrared communications device and USB cable used for communications
between detector and computer to easily make firmware updates, adjust detector settings and record data
* Replacement GCT IR Link USB Cable (P/N: IR-C)
•
Chargers:
* MGC Charging Station (P/N: MGC-CHRG-STATION) - 5 Bay charging station
* MGC Multi Charger (P/N: MGC-CHRG-MULTI) - 5 Cord A/C charger
* MGC Vehicle Charger (P/N: MGC-V-CHARGER1) - 12 VDC charger
* Replacement Charger (P/N: MGC-CHARGER1) - Standard 110 VAC Charger
•
MGC Confined Space Kit
(P/N: MGC-CSK) - Draw a sample or bump test with this all-inclusive kit housed in a
hard-sided carrying case w/foam insert: 1 ft . Sampling Probe, Air Stone Particulate Filter, MGC Calibration Cap, 10
ft . Sampling Hose and Hand Aspirator Pump Assembly with Quick Connect hose, 3 ft . Calibration/Test Hose with
Quick Connect, 0 .5Lpm Regulator with Quick Connect hose and GCT IR Link
* MGC Confined Space Kit with Gas (P/N: MGC-CSK-GAS) - MGC Confined Space Kit with Quad Gas Cylinder:
25 ppm H
2
S, 100ppm CO, 18% O
2
and 50% LEL (2 .5% vol . Methane) 58 Liter bottle
•
MGC Hand Aspirator Kit
(P/N: MGC-HAK) - 1 ft . Sampling Probe, Air Stone Particulate Filter, MGC Calibration Cap,
10 ft . Sampling Hose and 3 ft . Calibration/Test Hose connected to Hand Aspirator Pump Assembly
•
Sampling Probe
(P/N: MGC-PROBE-1) - 1 ft . Remote Sampling Probe
•
Calibration Gas
- 25 ppm H
2
S, 100 ppm CO, 18% O
2
and 50% LEL (2 .5% vol . Methane)
* 58L Quad Gas Cylinder (P/N: MGC-Q-58)
* 116L Quad Gas Cylinder (P/N: MGC-Q-116)
•
Calibration Accessories:
* Calibration/Test Hose (MGC-CALHOSE3) – 3 ft . Long 1/8” diameter hose
* Manual Regulator (P/N: SGC-REG) –Regulator for manually bump testing or calibrating
* MGC Calibration Cap (P/N: MGC-CALCAP) – Replacement Calibration Cap
* Sampling Hose (P/N: MGC-SAMPHOSE) – 1/8” Diameter hose sold by the foot
•
Replacement Sensors:
* H
2
S & CO Dual-Tox Sensor (P/N: MGC-SE-4DT)
* LEL Sensor - Infrared (P/N: MGC-SE-LEL-IR)
* LEL Sensor - Pellistor (P/N: MGC-SE-LEL-P)
* O
2
Sensor (P/N: MGC-SE-O
2
)
