© ANITA
MP02700EN_200408
GZ-5527 series
19
D11.
AUTOMATIC MACHINE CONTROL
Control pedal
The pedal position is scanned with a proximity switch which distinguishes 16 levels.
The meaning is in the table:
Pedal position
Pedal motion
Meaning
-2
Heel fully backwards
Command for thread trimming (seam finish)
-1
Heel slightly backwards
Command for foot lifting
0
Neutral position
See note
1
Slightly forwards
Command for foot lowering
2
Further forwards
Sewing at minimum speed (1 gear)
3
Further forwards
Sewing
–
second speed gear
:
:
:
13
Fully forward
Sewing at maximum speed (12 gear)
Note: The needle position can be pre-selected for the neutral position (needle down/up) as well as
for the foot position (down/up) at the seam-stop (by putting the pedal in the neutral position), and
for the foot position (down/up) after the seam finishing (by treading the pedal with heel fully
backwards and putting the pedal in the neutral position)
www.garudan.cz
