© ANITA
MP02700EN_200408
GZ-5527 series
15
D6.
FOOT LIFTING
Foot lifting with a hand lever
Lift the foot by pressing the lever
①
to a stop (foot remains lifted). Lower the foot by returning the
lever
①
to initial position or by pressing the knee lever
②
/if the machine is equipped by that/ and
by its subsequent releasing or by the automatic foot lifting by means of the pedal and subsequent
pedal releasing.
After the foot lifting by hand lever, the machine may be started up (e.g. when winding the hook
thread).
Foot lifting with knee lever (if the machine is equipped by that)
The foot is lifted by pressing the lever
②
, the foot is lowered by releasing the lever.
Automatic foot lifting
–
by solenoid
–
using the pedal [applies to GZ-5527-x47]
Tread the pedal
③
in position -1 (see section D11). The foot is lifted. Automatic foot lifting after
trimming can be pre-selected. The foot is lowered by the pedal
③
treading in po1.
www.garudan.cz
