© ANITA
MP02700EN_200408
GZ-5527 series
5
B
SAFETY INSTRUCTION
Read the instructions carefully before installation and use. Keep this manual for future reference.
B1.
GENERAL INSTRUCTION
1.
Do not operate the sewing machine until proper preparation has been made by a technician
or qualified person and safety precautions have been taken.
2.
Always follow the safety instructions when handling the machine.
3.
This sewing machine may only be operated by properly trained personnel.
4.
Maintenance, repair, inspection and adjustment of the machine may only be carried out by a
qualified person.
5.
Work on electrical equipment may only be performed by a qualified worker or person with
the appropriate authorization. Work on electric parts and equipment on your own is not
permitted.
6.
The machine may only be used for its intended purpose.
7.
The warranty does not cover any problems in the operation of the machine that are caused
by unauthorized modifications to the machine, as well as problems caused by non-
observance of the instructions given in this manual and generally known habits for the
operation and maintenance of industrial sewing machines.
8.
Warnings are indicated by the following symbols:
Danger
Caution
Warning
Read
the
manual
B2.
INSTALLATION PREPARATION
1.
Immediately report visible damage to the carrier. Check the contents of the order shipment
and report any defects immediately to the manufacturer. Later claims will not be accepted.
2.
Use the machine after checking that it meets all the safety standards of your country.
3.
The machine head is covered with a corrosion-proof coating. Wipe off the lubrication and
dust layer with a cloth or petrol before placing it on the work surface.
4.
The machine has been thoroughly inspected and tested before shipment. However, it may
have been damaged by transport or impact. Check the operation of the machine with the
hand wheel, to detect extraordinary noises, heavy running, etc. before starting the test
sewing.
5.
Never start the machine if the oil level is under or over the marked lines.
6.
Check that the power and phase are in accordance with the label instructions.
7.
Proper grounding of the machine is necessary.
8.
Use the correct grounding plug.
9.
Do not use an extension cord.
10.
Make sure that the power supply and voltage match the requirements on the label of the
machine.
11.
Do not use the machine in explosive or corrosive environment.
12.
In the first two weeks, do not exceed 3/4 of the maximum machine speed.
www.garudan.cz