Magnum 6KM Mobile Ethernet Switch Installation and User Guide
07/10
40
www GarrettCom com
.
.
Recommended external power input connector (not supplied with 6KM):
Manufacturer:
Binder-USA
Manufacturer pn: 99-4222-00-04
Safety rating: UL Recognized
Standard 6KM (Dual Source) male DC Power Input connector
:
Pin
1=
A
+
Pin
2=
B
+
Pin
3=
B
-
Pin
4=
A
-
A= Primary circuit
B= Secondary circuit
NOTE: The GND should be hooked up first. The 6KM unit has a floating ground, so
the user may elect to Ground either + or - terminal to suit the customer’s use.
Before connecting live power lines to the input connector of –48VDC,
12VDC, 24VDC, 110VDC, 125VDC or 250VDC products, always use a digital
voltmeter to measure the output voltage of the power supply and determine the lead
which is more “+ve potential”. The more “+ve” voltage lead from 48V or –48V
supply must be connected to the post labeled “+”.
After confirmation of the output voltage:
1.
Turn off power to the supply line.
2.
Connect
supply
line to the unit.
3.
Apply power to the supply line.
4.
Confirm that the PWR led is illuminated.
C6.0 ORDERING
INFORMATION FOR DUAL SOURCE DC POWER
To order the optional Dual-Source DC power supply factory installed, add
“Dual-Src-xxx” as a separate line item following the product model.
Example:
Magnum 6KM-48VDC
Dual-Src-48V
