background image

Magnum DS80F & DS80C Dual-speed Stackable Hubs        Installation and User Guide (12/01)

11

www  GarrettCom  com

.

.

Example 2.  Magnum DS80C

The Magnum DS80C fits very well with small business seeing a growth in users

volume and are forced to scale network quickly and cost effectively. Due to its 1SW and 2SW

Full duplex switching capability, the DS80C provides a very economical high Bandwidth

solution at copper port. The Dual-Speed functions supports a mixed environment of 10Mbps and

100Mbps users and the switching full duplex capability on 1SW and 2SW provides a high

bandwidth uplink solution for expansion. The “FF-A” manual switch options for port 2SW allow

this Hub to connect at Full duplex to any non-Auto-negotiating Switch using the “FF” mode.

Figure 2.6.1: Two DS80C connects together to provide 10Mbps and100Mbps network with

Fast Ethernet backbone.

In this example, two of the Magnum DS80C Personal Hub cascaded together to serve a small

office with multi-server, print server, internet access and mixed-speed requirements. The users

operate at 100Mb as well as at 10Mb and utility devices (such as print servers) run at 10Mbps.

High performance users need a high bandwidth backbone for access to a central LAN and central

file servers. Any attached node can change speed at any time without affecting network operation

or impacting other users. The two DS80C cascaded together solve the requirement economically

with reliability.

The Dual-Speed characteristic allows the DS80C to support the 10Mbps and 100Mbps

traffic and always operates at the higher speed. The switching capability at 1SW and 2SW

boosted the personal hub with its own switched 100Mbps or 10Mbps domain and provide a Fast

ethernet backbone for expanding the network.

and Workstations

  100Mb Servers

Tx         Rx

UPLINK

F

H

=     X

2SW

UPLINK

                             3            4              5            6            7             8

1SW

PORTS               1SW      2SW          3           4              5            6             7            8

Speed

Link/Act

F/H

Power
Error

GARRETT

12V, 1.5Amps

Print Server

Router

Users

Server

100

100

100

100

10

1       2       3       4                                 5       6       7      8

Tx         Rx

UPLINK

F

H

=     X

2SW

UPLINK

                               3             4               5             6             7               8

1SW

Personal Hub

PORTS                1 SW       2SW           3            4               5             6               7             8

Li nk/Act

Speed

F/H

Power

Error

GARRETT

12V, 1.5Am ps

10

Magnum DS80C Dual Speed

Personal Hub

Magnum DS80C Dual Speed

Summary of Contents for DS80C




























Reviews: