background image

Magnum DS80F & DS80C Dual-speed Stackable Hubs        Installation and User Guide (12/01)

10

www  GarrettCom  com

.

.

 2.6

Applications

The DS80F & DS80C are designed to bring future-proof fiber connectivity and highly

used copper connectivity to small user groups in offices, classrooms and labs.

Example 1. Magnum DS80F 

In this example, a Magnum DS80F Personal Hub serves a small

office with multi-server and mixed-speed requirements. Some users operate at 100Mbps, and

some users and utility devices (such as print servers) run at 10Mbps. High performance users

need a high bandwidth backbone for access to a central LAN and central file servers.  A

Magnum DS80F Personal Hub serves this requirement economically. The two 1SW and 2SW

full-duplex switched ports capability makes the required setup simple. Any attached node can

change speed at any time without affecting network operation or impacting other users.

Figure 2.6.1: A DS80F connects combinations of 10Mbps and100Mbps network devices and

provides a Fast Ethernet fiber backbone for access to the central LAN.

Where there is existing 10Mbps hubs and users, they can easily be cascaded into any

port of the DS80F. This allows a simple plug-and-play addition of 100Mbps ports to an existing

10Mbps network without having to change it.  Nodes that are capable of 100Mbps speed can be

moved to a DS80F dual-speed port, and will automatically operate at the higher speed.

The 1SW full duplex 100Mbps switched port can support a local server for Fast

Ethernet users.  The 100Mb fiber port on the DS80F can be used for accommodating high

performance data transfers, and provides fiber connectivity built-in rather than needing an

auxiliary media converter unit.  The 100Mbps traffic does not use the bandwidth of the 10Mbps

domain, so overall performance of the network is sustained at the highest possible level.

Tx         Rx

UPLINK

F

H

=     X

2SW

UPLINK

                             3            4              5            6            7             8

1SW

Magnum DS80 Dual Speed

Personal Hub

PORTS               1SW      2SW          3           4              5            6             7            8

Speed

Link/Act

F/H

Power
Error

GARRETT

12V, 1.5Amps

Print Server

 Users

Server

100

100

100

100

10

100

1       2       3       4                                 5       6       7      8

10 Mbps Workgroups

100Mbps
fiber

Summary of Contents for DS80C




























Reviews: