background image

Warranty Information

Regulatory Information

25

Your 

Axiom

 is warranted for 24 months, limited parts 

and labor, but does not cover damage caused by alter-

ation, modification, neglect, accident or misuse.

  In the event you encounter problems with your 

Axiom 

detector, please read through this User’s Manual 

carefully to ensure the detector is not inoperable due 

to manual adjustments. Press and hold the power 

button for 5 seconds to return to the recommended 

factory settings.    

  You should also make certain you have:

  1. Checked your battery charge and connections.  

    A low battery is the most common cause of  

    detector “failure.”

  2. Contacted your dealer for help, particularly if you  

    are not familiar with the 

Axiom

 detector.

  In the event that repairs or warranty service are 

necessary for your 

Axiom

, contact the retail outlet 

where your detector was purchased. To avoid excessive 

shipping and import charges, do not attempt to return 

a Garrett product  to the factory in the United States. 

   Information on international warranty/repair needs 

can be found on the Garrett website: 

www.garrett.

com

. Click on the Sport Division and then the Warranty/

Support menu for more details.

  This device complies with part 15 of the FCC Rules. 

Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and 

(2) this device must accept any interference received, 

including interference that may cause undesired 

operation. 

  Changes or modifications not expressly approved by 

the party responsible for compliance could void the 

user’s authority to operate the equipment.

  This device complies with Industry Canada license-

exempt RSS standard(s). Operation is subject to the 

following two conditions: (1) this device may not 

cause interference, and (2) this device must accept any 

interference, including interference that may cause 

undesired operation of the device.

   Ce produit est conforme aux normes RSS exemptes 

de licence d’Industry Canada. Son fonctionnement 

est soumis aux deux conditions suivantes  : (1) ce 

dispositif ne peut pas provoquer d’interférences et (2) 

ce dispositif doit accepter toute interférence, y compris 

celles pouvant entraîner un dysfonctionnement. 

Wireless Transmitter Specifications

Audio Delay:   

 

17 milliseconds

Audio Bandwidth:   

30-18,000 Hz

Operating Frequency:  2406–2474 MHz

Transmit Power:  

 

8.6 dBm EIRP

Certifications:    

 

FCC, CE, IC, AS/NZ

Summary of Contents for Axiom



























Reviews: