Garrett Axiom, User Manual

Page: 10 / 26

10
Z-Lynk Wireless Operation
Axiom features a built-in Z-Lynk wireless transmitter
which can be used with Garrett MS-3 wireless
headphones and any Z-Lynk enabled devices (such as
any other headphones connected to a Z-Lynk receiver).
A Z-Lynk Wireless headphone icon
(see illustration)
on the LCD indicates the current status of your wireless
connection. A steady icon indicates the detector is
paired with an operating Z-Lynk receiver that is within
range. A flashing icon indicates that the detector is
searching for a receiver. Absence of the icon indicates
that
Axiom’s wireless transmitter is switched off.
Pairing:
To pair with a new set of headphones/
receiver, simply switch the headphone/receiver on,
hold within 2 feet (0.6 meters) of the
Axiom . Next,
power on Axiom . Repeatedly press the MENU button
until the wireless icon is highlighted (as indicated
in this illustration). Press the (+) button to pair the
headphones.
Once paired, if the headphone/receiver is switched
off or moved out of range,
Axiom will search and
attempt to reconnect to the receiver for 5 minutes,
indicated by a flashing icon. If the connection is not
reestablished during this time,
Axiom will switch off its
wireless transmitter. To reconnect, simply switch the
Axiom off and then on again .
To unpair (forget) a set of headphones, simply press
the MENU button to select the wireless icon and then
use the (-) button to unpair.
Use of optional wired headphones:
Axiom can
also be operated with any wired headphones that
have a 1/4” plug. For headphones with an 1/8” plug, an
optional adaptor is available from Garrett.
Note: Packages shipped with MS-3 headphones
include a user’s guide for full details on wireless
headphone operation.
Press MENU until the wireless icon is selected. Use Plus (+)
or Minus (-) button to pair or unpair headphones.