Garrecht Avionik GmbH
VT-01 Transponder
Installation Manual - english -
Document:
01.0200.11E
Revision: 1.3
5
2. Preface:
This manual contains installation information and instructions for the Mode-S transponder VT-01. It
shall be read before installing your VT-01 transponder.
The installation shall be carried out or supervised by a qualified person. Damage caused by
installation by unqualified persons is not covered by the manufacturers warranty.
Safety symbols:
The following symbols and terms are used in this manual:
Warning
Warning statements identify conditions or practices that could result in injury or
loss of life
Caution
Caution statements identify conditions or practices that could result in damage of
this product or other property.
Important note:
Indicates important or usefull information. It is strongly recommended to read,
understand and follow the statement.
3. Unpacking and part identification
3.1. VT-01:
The VT-01 transponder system is supplied with the following:
P/N:
VT-0101-()-()-()
Steering unit
P/N:
VT-0102-()-()-()-070
Central unit Class 2 (71 Watt)
or
VT-0102-()-()-()-125
Central unit Class 1 (125 Watt)
Document:
01.0200.10
User’s guide
Document:
01.0200.11
Installation manual (this document)
Available options:
P/N: VT-0103-1-()-()
Mounting kit/wiring harness with installation cradle
(required for installation of VT-01 as a two block system with remote
steering unit. It also allows simple and quick installation and removal
of the central unit. VT-01UC cannot be installed as two block
systems).
P/N:
VT-0103-2-()-()
Mounting kit/wiring harness without installation cradle
Document:
01.0200.12
Maintenance and repair manual (for avionic repairshops only)
