Garrecht Avionik GmbH
VT-01 Transponder
Installation Manual - english -
Document:
01.0200.11E
Revision: 1.3
23
6.2.4.2. Wiring the connection between the steering unit and the central unit
CN2: Use for connecting to the central unit via
connector of the mounting kit. Perform a 1:1
connection to the craddle connector:
•
Power
•
GND
•
Suppression
•
On ground
•
RS-232 (for ADS-B)
•
CAN-Bus
Back of steering unit
Wire the female SUB-D 9 plug to be connected to CN2 (back of the steering unit) to the cable leading
to the craddle as described in the following table.
Pin
Function
1
+10V to +28V DC
2
Suppression
3
RS232 RX
4
CAN-Low
5
GND
6
Pwr_enable
7
On Ground
8
CAN-High
9
GND
viewed from back of SUB-D 9 female connector
CN 2
