GARO TFA4500-3D, User Manual

Page: 12 / 40

USER’S MANUAL
-
8
-
2.6 TYPES OF VEHICLES SUITABLE FOR
BEING
LIFTED AND OVERALL
DIMENSIONS
Model TFA4500-3D lifts are suitable for virtually all
vehicles with total weight of no more than 4000kg
.
Model TFA5000-3D lifts are suitable for virtually all
vehicles with total weight of no more than 5000kg
.
Model TFA5500-3D lifts are suitable for virtually all
vehicles with total weight of no more than 5500kg
.
Model TFL5000-3D lifts are suitable for virtually all
vehicles with total weight of no more than 5500kg
.
The vehicle dimension shall not exceed the below data:
Max. width: 2400 mm.
Max. wheelbase: 3000 mm.
Max. distance between outer wall of tyres, inclusive of
bulge caused by weight of vehicle on ground: 2000 mm.
Min. distance between inner walls of tyres, inclusive of
bulge caused by weight of vehicle on ground: 900 mm.
Caution: the lower parts of the vehicle underbody could
interfere with structural parts of the lift.
Take particular care in the case sports-cars.
The lift will also handle customized or non-standard
vehicles provided they are within the maximum specified
carrying capacity.
Also the personnel danger zone must be defined in
relation to vehicles with unusual dimensions.
The following diagrams illustrate criteria used to define the
operating limits of the lift.
Fig. 11
Table 2
FOR LARGER DIMENSIONS CHECK THE
MAXIMUM LOAD AND POSSIBLE UNBALANCE.
MAXIMUM WEIGHTS OF VEHICLES BEING
LIFTED
Fig. 12 Weight Distribution
Min. (mm) Max. (mm)
A 2300 4500
B 200
C 2000
D 900