Garmin RVCAM 795 Owner'S Manual Download | Manualshive

Page: 14 / 78

background image

Adjusting the screen brightness

1 Select > Display > Brightness.
2 Use the slider bar to adjust the brightness.

Vehicle Profiles

WARNING

Entering your vehicle profile characteristics does not guarantee that your vehicle's characteristics will be
accounted for in all route suggestions or that you will receive the warning icons in all cases. Limitations may
exist in the map data such that your device cannot account for these restrictions or road conditions in all cases.
Always defer to all posted road signs and road conditions when making driving decisions.

Routing and navigation are calculated differently based on your vehicle profile. The activated vehicle profile is
indicated by an icon in the status bar. The navigation and map settings on your device can be customised
separately for each vehicle type.
When you activate a camper vehicle profile, the device avoids including restricted or impassable areas in routes
based on the dimensions, weight and other characteristics you entered for your vehicle.

Adding a vehicle profile

You should add a vehicle profile for each camper to be used with your device.
1 From the status bar, select the vehicle profile icon, such as

or

.

2 Select
3 Select your vehicle type:

• To add a motorhome with a permanently attached camper, select Motorhome.
• To add a motorhome pulling a trailer, select Motorhome with Trailer.
• To add a camper pulled behind a passenger vehicle, select With Trailer.

4 If necessary, select your trailer type:

• To add a camper pulled using a standard hitch, select Caravan.
• To add a camper pulled using a fifth-wheel hitch, select Fifth Wheel.

NOTE: this trailer type is not available in all areas.

• To add a boat trailer pulled using a standard hitch, select Boat Trailer.
• To add a trailer pulled using a standard hitch, select Caravan.

5 Follow the on-screen instructions to enter the vehicle characteristics.
After you add a vehicle profile, you can edit the profile to enter additional detailed information (

Editing a vehicle

profile, page 9

).

Adding an environmental zone vehicle profile

You can add a vehicle profile for the environmental zone settings specific to your vehicle, such as fuel type and
emission standard.
NOTE: this feature is not available for all regions or product models.
1 Select > Navigation > Environmental Zones.
2 Follow the on-screen instructions.

Car Profile

The car profile is a preloaded vehicle profile intended for use in an automobile without a trailer. While using the
car profile, the device calculates standard automobile routes, and routing for large vehicles is not available.
Some features and settings specific to large vehicles are not available while using the car profile.

8

Vehicle Profiles

«
...
12
13
14
15
16
...
»

Summary of Contents for RVCAM 795















































































Reviews:

No comments

Related manuals for RVCAM 795

Brand: Garmin Pages: 2

Brand: Garmin Pages: 2

Brand: Garmin Pages: 35

Brand: Garmin Pages: 40

Brand: Garmin Pages: 90

Brand: Garmin Pages: 200

Brand: Garmin Pages: 58

Brand: Garmin Pages: 22

Brand: Garmin Pages: 16

GPSMAP 7400 Series

Brand: Garmin Pages: 52

Brand: Garmin Pages: 2

GPSMAP 700 Series

Brand: Garmin Pages: 66

GPSMAP 162 Sounder

Brand: Garmin Pages: 2

Brand: Garmin Pages: 104

Brand: Garmin Pages: 86

Brand: Garmin Pages: 88

Brand: Garmin Pages: 2

Brand: AnyDATA Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands