Garmin Rino 120 Owner'S Manual Download

Page: 72 / 124

Rino

120 Owner’s Manual

NIT

PERATION

RACKS

AGE

To use the TracBack feature:

1. Highlight the

Tracback

button on the Tracks Page

and press the

Thumb Stick

In. The Tracback

Menu options (

To Beginning

and

To End

) are

displayed.

2. Highlight the desired option and press the

Thumb

Stick

In to enable.

3. Use the Map Page or the Navigation Page to

navigate the Track.

Setting up the Track Log

You can set the track recording interval to Distance,

Time, or Automatic. You can set the Track display

resolution to High, Medium, Low, and Lowest. You can

also use the Option Menu to delete all saved tracks.

To use Track Log Setup options:

1. Highlight the Tracks Page

Option Menu

button

at the top of the page and press the

Thumb

Stick

In to display the menu.

2. Highlight the

Tracks Log Setup

option and then

press the

Thumb Stick

In.

You can check the

Wrap When Full

option by

highlighting it and then pressing the

Thumb Stick

In. You can highlight the

Record Method

and

Interval

ﬁelds and press the

Thumb Stick

In to

display their options.

Interval

options change to

accommodate the

Record Method

choices.

Summary of Contents for Rino 120





























































































































Search results

Summary of Contents for Rino 120

Reviews:

Related manuals for Rino 120

Brands by name

Popular brands

Garmin Rino 120, Owner'S Manual

Search results

Summary of Contents for Rino 120

Reviews:

Related manuals for Rino 120

Brands by name

Popular brands