background image

70 

Rino

®

 120 Owner’s Manual

U

NIT

 O

PERATION

 > 

S

ATELLITE

 P

AGE

Restart Search

—Select this option if today is not date 

provided.

Continue Acquiring

—Select this option if no other 

option applies. The unit attempts to gather GPS signals.

Satellite Page Options

Use With GPS Off

—Use this option when you are 

indoors, your view of the sky is obstructed, or you want 

to save battery power. You can enter data, create routes, 

etc., but cannot navigate in this mode. 

Track Up/North Up

—You can orient the satellite 

skyview by selecting 

Track Up

 (your direction of travel) 

or 

North Up

 (the satellite skyview oriented to the north). 

New Location

—If you are more than 600 miles (from 

where you last used the unit), select the 

New Location

 

and then the 

Use Map

 options to approximate your 

location. This gives the unit reference information and 

speeds satellite acquisition.

Satellite Page Option Menu

T

o select the Use With GPS Off option:

1.  Use the 

Thumb Stick

 to highlight the 

Option 

Menu

 button 

 at the top of the page and then 

press it In.

2.  Use the 

Thumb Stick

 to highlight the 

Use With 

GPS Off

 option and then press it In.

  The Rino 120 stops tracking satellites and cannot 

be used for navigation. However, the next time 

you turn the unit on, it returns to Normal GPS 

operation.

Summary of Contents for Rino 120





























































































































Reviews: