54
nüviCam
nüviCam
55
TIP:
You may need to use a coin to remove the end
piece.
2
Remove the end piece, the silver tip
2
, and the fuse
3
.
3
Insert a new fast-blow fuse that has the same current,
such as 1 A or 2 A.
4
Place the silver tip in the end piece.
5
Push in the end piece and rotate it 90 degrees clock-
wise to lock it back into the vehicle power cable
4
.
Removing the Device, Mount, and
Suction Cup
Removing the Device from the Mount
1
Grip the device by the top and bottom.
2
Pull the bottom edge of the device toward you until it
releases from the magnet.
Pulling the device straight toward you may cause the
mount to release from the suction cup.
Removing the Mount from the Suction Cup
1
Turn the device mount to the right or left.
2
Apply pressure until the socket on the mount releases
the ball on the suction cup.
Removing the Suction Cup from the Windshield
1
Flip the lever on the suction cup toward you.
2
Pull the tab on the suction cup toward you.
Purchasing Additional Maps
1
Go to your device product page at (
Garmin.com.sg
).
2
Click the
Maps tab
.
3
Follow the on-screen instructions.
Purchasing Accessories
Go to
Troubleshooting
The suction cup will not stay on my
windshield
1
Clean the suction cup and windshield with rubbing
alcohol.
2
Dry with a clean, dry cloth.
3
Mount the suction cup (
Mounting and Powering the
nüviCam Device in Your Vehicle
).
My device is not acquiring satellite
signals
• Verify the GPS simulator is turned off (
Navigation
Settings
).
• Take your device out of parking garages and away
from tall buildings and trees.
• Remain stationary for several minutes.
The device does not charge in my vehicle
• Check the fuse in the vehicle power cable (
Changing
the Fuse in the Vehicle Power Cable
).
• Verify the vehicle is turned on and is supplying power
