10
nüviCam
nüviCam
11
2
Press it in until it clicks.
Mounting and Powering the nüviCam
Device in Your Vehicle
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused
by battery exposure to extreme heat, store the device out
of direct sunlight.
Both the device and its mount contain magnets. Under
certain circumstances, magnets may cause interference
with some internal medical devices, including pacemak-
ers and insulin pumps. Keep the device and its mount
away from such medical devices.
Both the device and its mount contain magnets. Under
certain circumstances, magnets may cause damage to
some electronic devices, including hard drives in laptop
computers. Use caution when the device or its mount is
near electronic devices.
Before you use your device on battery power, you should
charge it.
1
Press the mount
1
onto the suction cup
2
until it
snaps into place.
2
Open the lever
3
, press the suction cup to the wind-
shield, and flip the lever back toward the windshield.
The lever must be oriented toward the top of the
windshield.
3
Extend the suction cup arm
4
.
4
If necessary, rotate the mount so the Garmin
®
logo
faces right-side up.
5
Plug the vehicle power cable
5
into the port on the
mount.
