manualshive.com logo in svg

Garmin Mobile 20, Pilot'S Manual

Share
Download
Garmin Mobile 20 Pilot'S Manual Download Page 77

65

Detailed Operation

Legend

Press 

MENU/ENTER

 key and then press the 

LEGEND

 Menu Item key to display the legends describing the 

graphic display colors. Press the 

LEGEND

 Menu Item key once to display a legend for the Metar, Weather, and 

Radar colors. Press the 

LEGEND

 key a second time to display a legend for AIRMET and SIGMET colors and 

EchoTop graphics. 
When viewing the Canadian radar data, the following legends will appear. Only the lower portion of the 
legend changes for Canadian radar data. 

Map Detail

Press 

MENU/ENTER

 key and then press the Map Detail Menu Item key to choose between the display of No 

Overlays, the Base Map, or Map and Nav Aids. 

Map Orientation

Press 

MENU/ENTER

 key and then press the Map Orientation Menu Item key to choose the configuration of 

the map orientation of DTK Up, North Up, TRK Up, TRK Up Arc, or TRK Up 360. 

WSI - FIS

WSI FIS Graphic Weather Legend (US)

WSI FIS Graphic Weather Legend (Canada)

WSI FIS Graphic Weather Menu Items (Trk Arc Up)

Summary of Contents for Mobile 20

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands