background image

8

Getting Started

Data Flag

Description

Terrain coverage is not available for some part of the 
terrain advisory coverage area. Terrain advisories may 
not be provided. 
When connected to the SL30, indicates the SL30 is not avail-
able or valid. ILS, OBS, and VORs will not be highlighted. 
No valid traffic information is being received from the 
optional Ryan TCAD sensor.  Traffic information will 
not be displayed. 
Indicates that radar status information is not available 
from the optional external radar transmitter head.  
Radar related functionality may not be available. 

 (Green)

Indicates that the radar is ON and transmitting RF 
energy. Appropriate precautions should be taken. 

 (Green Flashing)

Indicates that the radar is in Hold and is transmitting 
RF energy. Appropriate precautions should be taken. 

 (Green)

Displayed when the GDL 90 is in Ident mode. 

No valid datalink information is available from the 
optional external source. 
No valid terrain information is available from the 
optional external source. 
No valid datalink information is available from the 
optional external source. 
No valid TIS-A information is available from the 
optional external source. 

Data Flags

Summary of Contents for Mobile 20

























































































































































Reviews: