manualshive.com logo in svg

Garmin Mobile 20, Pilot'S Manual

Share
Download
Garmin Mobile 20 Pilot'S Manual Download Page 76

64

Detailed Operation

Temporary Flight Restrictions (TFRs)

Temporary Flight Restrictions (TFRs) indicate areas where flight restrictions have been imposed. They are 
depicted as areas with reddish-brown outlines and a cross-hatch pattern. The area may also contain the TFR 
identifier. The TFR identifier includes the TFR number and upper altitude. 

US or Canadian Weather Radar

This option is only available when subscribed to both radar products. WSI offers subscriptions for US and Ca-
nadian radar data. Because of differences in radar technology, both data types cannot be displayed at the same 
time. When subscribed to both weather radar products, you can alternate between the two with the Overlay 
option. 

Menu Options for Overlay Page 2

1. Press the 

OVRL

 function key to allow selection of the Overlay choices when viewing the Graphical WX 

option. 

2. Press 

MENU/ENTER

 to display menu items for the Overlay. 

3. Press 

MAIN MENU

 to return to the Main Menu. 

Label

Press 

MENU/ENTER

 key and then press the 

LABEL

 Menu Item key to toggle the station labels on and off. 

Flight Plan

Press 

MENU/ENTER

 key and then press the 

FLIGHT PLAN

 Menu Item key to toggle the Flight Plan course 

line on and off. The magenta line is the active leg. 

WSI - FIS

WSI FIS Graphic Weather Menu Items

Summary of Contents for Mobile 20

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands