1
Marine Ethernet Connection
I
NTRODUCTION
The Ethernet cable termination is designed for use with the Garmin Marine Network. It must be installed according to the following instructions
to get the best possible performance. To complete the installation, you need the appropriate equipment and tools.
If you experience diffi culty
with the installation, contact Garmin Product Support.
Included Equipment:
1 - RJ-45 Modular Plug
1 - Ethernet cable termination
1 - O-Ring
1 - Copper Tape Strip
Tools Required:
Knife
Pliers
15 mm Wrench
AMP Modular Plug Hand Tool and Die Set or Compatible equivalent
O-Ring
RJ-45
Modular Plug
Cable
Termination
Figure 1
I
NTRODUCTION
190-00489-00_0B.indd 1
3/16/2005 12:14:07 PM
