190-01499-02
GTX 3X5 Transponder TSO Installation Manual
Rev. 9
Page E-16
CS-ACNS Compliance Matrix
CS ACNS.D.ADSB.100 Integrity
(continued)
9. Airborne/Surface Navigation Accuracy
Category for Velocity: NACv
The GTX 3X5 is designed to meet design assurance
level C which meets the 'major' failure classification
for ADS-B Out. All approved position sources are
designed to meet at least a 'major' failure
classification.
10. Emitter Category
11. Surface Horizontal Position - Latitude and
Longitude
12. Surface Navigation Integrity Category: NIC
13. Surface Ground Track
14. Movement (surface ground speed)
15. Length/width of Aircraft
16. GPS Antenna Offset
17. Geometric Altitude
18. Geometric Altitude Quality: GVA
b)
The ADS-B Out system integrity is designed
commensurate with a 'minor' failure condition
for the transmission of other data parameters.
GTX 3X5 is designed to meet design assurance level
C which exceeds the 'minor' failure classification for
TSO-C166b 3.b loss of ADS-B Out transmission as a
'minor' failure condition.
CS ACNS.D.ADSB.105 Continuity
The ADS-B Out system continuity is designed to an
allowable qualitative probability of 'remote'.
The GTX 3X5 units have a design assurance level of C
'remote' for listed functions.
The GTX units have a maximum ADS-B system failure
rate of no less than 5000 hrs using the MTBF rates, or
2.0E-04 failure rate.
CS ACNS.D.ADSB.110 Horizontal Position and
Velocity Data Refresh Rate
A horizontal position and velocity source calculates
position and velocity data with a rate of at least 1
Hertz.
For Garmin GPS sources an update rate of 5 Hz is
assumed (see Note 1).
For non-Garmin GPS sources, the worst case update
rate (1 Hz) is assumed.
CS-ASNS SECTION
CS-ACNS DESCRIPTION
COMPLIANCE SUMMARY