Post Installation Configuration & Checkout
190-01499-02
GTX 3X5 Transponder TSO Installation Manual
Rev. 9
Page 6-3
6.4
Audio Settings
Configures the audio output, volume, and alert types.
Figure 6-1 Audio Group
Audio Output
To use the audio output of the transponder, select XPDR. If installing a GTX 345 in a GX000 system, select HSDB.
Volume
To raise the volume of the transponder audio, push
8
. To lower the volume, push
9
. The range is 0 to 100.
Voice
Set the voice type to MALE or FEMALE.
Test Audio
The test audio files are used to set the volume level of the transponder. Selections are:
Figure 6-2 Audio Page
• NONE
• TONE
• MSG 1
• MSG 2
• MSG 3
AUD
TIMER EXPIRED ALRT
TRAFFIC ALERT
VOICE
VOLUME
AUDIO OUTPUT
ALTITUDE ALRT