background image

190-01499-02

GTX 3x5 TSO Installation Manual

Rev. 1

Page 1-13

Table 1-13   TSO and ETSO Descriptions 

Table 1-14   TSO/ETSO Deviations

TSO/ETSO

Description

TSO-C74d

Air Traffic Control Radar Beacon System (ATCRBS) Airborne Equipment

TSO-C88b
ETSO-C88a

Automatic Pressure Altitude Reporting Code-Generating Equipment

TSO-C112e
ETSO-C112d

Air Traffic Control Radar Beacon System / Mode Select (ATCRBS/Mode S) 
Airborne Equipment

TSO-C145d
ETSO-C145c

Airborne Navigation Sensors Using the Global Positioning System 
Augmented by the Satellite Based Augmentation System

TSO-C154c
ETSO-C154c

Universal Access Transceiver (UAT) Automatic Dependent Surveillance – 
Broadcast (ADS-B) Equipment Operating on Frequency of 978 MHz

TSO-C157a
ETSO-C157a

Aircraft Flight Information Services – Broadcast (FIS-B) Data Link System 
and Equipment

TSO-C166b
ETSO-C166b

Extended Squitter Automatic Dependent Surveillance – Broadcast (ADS-B) 
and Traffic Information Service – Broadcast (TIS-B) Equipment Operating on 
the Radio Frequency of 1090 Megahertz (MHz)

TSO-C195a
ETSO-C195a

Avionics Supporting Automatic Dependent Surveillance – Broadcast 
(ADS-B) Aircraft Surveillance Applications (ASA)

TSO/ETSO

Deviation

TSO-C74d

1. Garmin requests a deviation from the mentioned TSOs to use RTCA DO-160G instead 

of earlier versions of RTCA/DO-160 as the standard for Environmental Conditions and 
Test Procedures for Airborne Equipment. ELOS is provided by use of later revision 
requirement document. Refer to AC 21-16G for supporting guidance.

TSO-C88b

1. Garmin requests a deviation from the mentioned TSOs for marking the TSO number, 

Type/Class and Date of Manufacture, Deviation and Software Part Number on the 
exterior of the unit. Instead, Garmin requests to include product name, part number, 
serial number, and this statement on the unit’s nameplate label “TSO-C112e See IM for 
Add’l Appliance Apprvls.” The installation manual will contain all equipment approvals, 
classes/types/ranges and TSO deviations as required by the TSOs, and the software 
part numbers for the unit will be available through electronic query within the unit. ELOS 
is provided because the installation manual will list all applicable information and the 
article will permanently and legibly list the Primary TSO and state “See IM for Add’l 
Appliance Apprvls.” All software part numbers can be verified through electronic query. 
See Order 8150.1C Section 7-4e-4 and 8110.49 for further supporting statement of 
policy.

TSO-C112e

1. Garmin requests a deviation from the mentioned TSOs for marking the TSO number, 

Type/Class and Date of Manufacture, Deviation and Software Part Number on the 
exterior of the unit. Instead, Garmin requests to include product name, part number, 
serial number, and this statement on the unit’s nameplate label “TSO-C112e See IM for 
Add’l Appliance Apprvls.” The installation manual will contain all equipment approvals, 
classes/types/ranges and TSO deviations as required by the TSOs, and the software 
part numbers for the unit will be available through electronic query within the unit. ELOS 
is provided because the installation manual will list all applicable information and the 
article will permanently and legibly list the Primary TSO and state “See IM for Add’l 
Appliance Apprvls.” All Software part numbers can be verified through electronic query.  
See Order 8150.1C Section 7-4e-4 and 8110.49 for further supporting statement of 
policy.

Summary of Contents for GTX 325




































































Reviews: