GTN 625/635/650 TSO Installation Manual
190-01004-02
Page 1-32
Rev. F
1.6.3 FliteCharts
®
Database (GTN 725/750 Only)
FliteCharts resemble the paper version of AeroNav Services (formerly named National Aeronautical
Charting Office) terminal procedures charts. The charts are displayed with high-resolution and in color for
applicable charts. FliteCharts database subscription is available from Garmin. When viewing these charts
on the GTN, the aircraft position is not depicted on the chart. The FliteCharts database is updated by
removing the database card from the GTN, updating the database on the card and reinserting the card. Each
card can only be used with one system. GTN users update their database card by purchasing database
subscription updates from Garmin. The database card is programmed using an SD card reader. Contact
Garmin at 866-739-5687 or go to
flyGarmin.com
for more information and instructions.
1.6.4 ChartView™ Database (GTN 725/750 Only)
ChartView resembles the paper version of Jeppesen terminal procedures charts. The charts are displayed in
full color with high-resolution. The GTN depiction shows the aircraft position on the moving map in the
plan view of approach charts and on airport diagrams. The ChartView database is stored on an SD memory
card that remains in the GTN for normal operation. The ChartView database is updated by removing the
database card from the GTN, updating the database on the card and reinserting the card. Each card can only
be used with one system. GTN users update their ChartView data by purchasing database subscription
updates from Jeppesen Sanderson. The database card is programmed using an SD card reader and
Jeppesen-provided software. Contact Jeppesen at 800-621-5377 or
www.jeppesen.com
for more
information and instructions.
1.6.5 SafeTaxi
®
Database
SafeTaxi diagrams provide detailed taxiway, runway, and ramp information at more than 900 airports in
the United States. The data conversion process is performed using software that is developed and
maintained under Garmin configuration management according to RTCA/DO-200A, Level 2, Standards
for Processing Aeronautical Data.
The SafeTaxi database is stored internally in the GTN for normal operation. The SafeTaxi database is
updated by removing the database card from the GTN, updating the database on the card and reinserting
the card. Each card can only be used with one system. GTN users update their database card by purchasing
database subscription updates from Garmin. The database card is programmed using an SD card reader.
Contact Garmin at 866-739-5687 or go to
flyGarmin.com
for more information and instructions.
1.6.6 Terrain Database
The Terrain database is used to provide basic terrain awareness functionality. The Terrain database is also
used to provide TAWS or HTAWS alerts to the pilot (with TAWS or HTAWS software only). The data
conversion process is performed using software that is developed and maintained under Garmin
configuration management according to RTCA/DO-200A, Level 2, Standards for Processing Aeronautical
Data.
The Terrain database is available from Garmin for updating as needed. The terrain database is updated by
removing the database card from the GTN, updating the database on the card and reinserting the card in the
vertical card slot on the left side of the GTN. The Terrain database can be downloaded via the internet and
the card can be programmed using an SD card reader. Contact Garmin at 866-739-5687 or go to
flyGarmin.com
for more information or instructions.
Summary of Contents for GTN 625
