Garmin GTN 625, Installation Manual

Page: 140 / 254

GTN 625/635/650 TSO Installation Manual 190-01004-02
Page 6-30 Rev. F
TAWS AUDIO
Access the Audio Clips page, as shown in

Figure 6-30, by touching the ‘Audio Clips’ key on
the Terrain Configuration page as shown in
Figure 6-28 or Figure 6-29. For TAWS-B, select
which message is heard for cautions and warnings.
The audio clips for HTAWS are not configurable.
The Audio Clips page for HTAWS is only used to
sample the audio clips.
AIRPORT CRITERIA
Configure airport criteria from the Terrain Configuration page, as shown in Figure 6-28 or Figure 6-29.
Touch ‘Runway Surf’ key to select the applicable runway surface type. The selections are Any, Hard Only,
Hard/Soft, and Water.
Enter the minimum runway length by touching the ‘Min. Length’ key using the keypad. The range is 0 to
25,000 ft.
Description Selections
NCR Caution
“Don’t Sink”
“Too Low Terrain”
EDR Caution “Sink Rate”
PDA Caution “Too Low Terrain”
IOI Caution
“Obstacle Ahead” x2
“Caution Obstacle” x2
ROC Caution
“Obstacle Ahead” x2
“Caution Obstacle” x2
ITI Caution
“Terrain Ahead” x2
“Caution Terrain” x2
RTC Caution
“Terrain Ahead” x2
“Caution Terrain” x2
IOI Warning
“Obstacle Ahead Pull Up” x2
“Obstacle” x2 “Pull Up” x2
ROC Warning
“Obstacle Ahead Pull Up” x2
“Obstacle” x2 “Pull Up” x2
ITI Warning
“Terrain Ahead Pull Up” x2
“Terrain” x2 “Pull Up” x2
RTC Warning
“Terrain Ahead Pull Up” x2
“Terrain” x2 “Pull Up” x2
EDR Warning “Pull Up”
VCO Caution “Five Hundred”
Figure 6-30. Audio Clips Page