Garmin GPSMAP 96 - Hiking Pilot'S Manual Download Page 2

Page: 2 / 150

1200 East 151

Street,

Olathe, Kansas 66062, USA

Tel. (913) 397.8200 or (800) 800.1020

Fax (913) 397.8282

Garmin (Europe) Ltd.

Liberty House

Hounsdown Business Park,

Southampton, Hampshire, SO40 9RB UK

Tel. +44 (0) 870.8501241 (outside the UK)

0808 2380000 (within the UK)

Fax +44 (0) 870.8501251

Garmin Corporation

No. 68, Jangshu 2

Road,

Shijr, Taipei County, Taiwan

Tel. 886/2.2642.9199

Fax 886/2.2642.9099

disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin.

Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium

to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this

manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution

of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Garmin reserves the right to change or improve

its products and to make changes in the content without obligation to notify any person or organization of such

changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental

information concerning the use and operation of this and other Garmin products.
Garmin

is a trademark of Garmin Ltd. or its subsidiaries, registered in the USA and other countries.

GPSMAP

AutoLocate

, TracBack

, BlueChart

, and MapSource

are trademarks of Garmin Ltd. or its subsidiaries. These

trademarks may not be used without the express permission of Garmin.

March 2007

Part Number 190-00420-00 Rev. C

Printed in Taiwan

Summary of Contents for GPSMAP 96 - Hiking























































































































































Search results

Summary of Contents for GPSMAP 96 - Hiking

Reviews:

Related manuals for GPSMAP 96 - Hiking

Brands by name

Popular brands

Garmin GPSMAP 96 - Hiking, Pilot'S Manual

Search results

Summary of Contents for GPSMAP 96 - Hiking

Reviews:

Related manuals for GPSMAP 96 - Hiking

Brands by name

Popular brands