GPSMAP 2206/2210 Owner’s Manual
75
U
SING
S
ONAR
>
S
ONAR
P
AGE
Configuring the Sonar Page
You can customize the Sonar page to fit your navigational needs See “
33
for more information.
To add or remove functions on the Sonar Page:
1. Open the Sonar Page, and then press and hold the
DATA/CNFG
key to
open the Configuration window.
2. Using the
ROCKER
, highlight the function you want to add or remove, and
press
ENTER
. Only functions with a check mark in the check box next to
them appear on the Sonar Page.
To split the screen:
1. On the Configuration window, press the
Split Zoom
soft key to show a
split screen view of a zoomed portion of the sonar.
OR
Press the
Split Freq
soft key to show two different frequencies.
2. Press
QUIT
to return to the Sonar Page.
Using the Flasher
If you prefer the appearance of flasher sonars, select the
Flasher
function on the
Configuration window for the Sonar Page. It provides an almost instantaneous
return of what is below your boat.
Sonar Page and Flasher
The most intense, constant signal on the Flasher is the actual depth and bottom.
The colors indicate the different strength of the signals.
• A soft bottom (such as silt or mud) creates as signal that is narrow and
more faint.
• A hard bottom (such as sand or rock) creates a signal that is wider.
