Garmin GPSMAP 2206 Page 102 Owner'S Manual Download | Manualshive

Page: 102 / 106

background image

94

GPSMAP 2206/2210 Owner’s Manual

A

PPENDIX

>

FCC C

OMPLIANCE

AND

D

ECLARATION

OF

C

ONFORMITY

(DOC)

FCC Compliance

The GPSMAP 2206/2210 complies with Part 15 of the FCC interference limits for Class B

digital devices FOR HOME OR OFFICE USE. These limits are designed to provide more

reasonable protection against harmful interference in a residential installation, and are more

stringent than “outdoor” requirements.
Operation of this device is subject to the following conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.
This equipment generates, uses, and can radiate radio frequency energy and may cause

harmful interference to radio communications if not installed and used in accordance with

the instructions. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and the receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The GPSMAP 2206/2210 does not contain any user-serviceable parts. Repairs should only be

made by an authorized Garmin service center. Unauthorized repairs or modiﬁcations could

result in permanent damage to the equipment, and void your warranty and your authority to

operate this device under Part 15 regulations.

Declaration of Conformity (DoC)

Hereby, Garmin declares that this GPSMAP 2206/2210 is in compliance with the

essential requirements and other relevant provisions of Directive 1999/5/EC.
To view the full Declaration of Conformity, see the Garmin Web site for your

Garmin product:

http://www.garmin.com/products/gpsmap2206/

Manuals

and then select the

Declaration of Conformity

.

«
...
100
101
102
103
104
...
»

Summary of Contents for GPSMAP 2206











































































































Reviews:

No comments

Related manuals for GPSMAP 2206

nuvi 200 Series

Brand: Garmin Pages: 16

Brand: Racelogic Pages: 2

Sprintshield Touch

Brand: Radikal Pages: 21

Brand: Teltonika Pages: 25

Brand: Lowrance Pages: 1

ECHOMAP UHD2 6 SV

Brand: Garmin Pages: 14

eXplorist 200 - Hiking GPS Receiver

Brand: Magellan Pages: 84

Brand: Suunto Pages: 9

Brand: LG Pages: 54

Brand: LG Pages: 48

Brand: Magellan Pages: 51

Brand: Cantrack Pages: 3

Brand: Car Secretary Pages: 8

HawkEye 7200A-BB2327

Brand: Blue Sky Network Pages: 27

Brand: Trafficmaster Pages: 2

Brand: Becker Pages: 22

Brand: Furuno Pages: 30

Brand: Diweitrack Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands