35
The GPSMAP’s GOTO command lets you select any stored waypoint or
target cursor position as a destination and quickly set a course from your
present position. Once a GOTO has been activated, the Highway Page will
provide steering guidance to your destination. A GOTO may be activated on
the map display using the cursor, or from any waypoint list.
To activate a GOTO from the map display:
1. Press the
D
key.
The cursor will appear as an arrow pointer, which lets you point to a
position as your destination using the
K
keypad. If you want to GOTO an
existing on-screen waypoint, ‘snap to’ the waypoint with the arrow pointer and
press the
C
key. If your destination is not an existing waypoint or is an
on-screen navaid, you’ll need to mark the position as a waypoint:
2. Press the
C
key to confirm the arrow pointer position as your destination.
3. If you want to accept the new GOTO waypoint with the default name, symbol
and comment, press
C
to confirm the ‘OK’ prompt.
4. To enter your own name, symbol or comment, highlight the appropriate field
and press
C
. After entering your changes, move the field highlight back to the
‘OK’ prompt and press
C
.
You can also quickly activate a GOTO to any stored waypoint from any
waypoint list (e.g. the waypoint list or nearest waypoints list).
To activate a GOTO from a waypoint list:
1. Highlight the desired waypoint with the
K
keypad.
2. Press
D
key to activate the GOTO mode.
3. Press
C
to confirm the new GOTO waypoint.
SECTION
7
GOTO KEY
Activating GOTOs
Cursor GOTO
List GOTO
215225manb.qxd 4/27/00 9:22 AM Page 35
